Figure 16. Side of Device with Removed Battery Cover Plate and BATTERY
Mounting the IC-317x
This section provides information for creating a custom mount for the IC-317x. If you do not
want to create a custom mount, a panel mount kit for the IC-317x is available from National
Instruments (part number 784791-01).
Caution
Doing so may cause the IC-317x device to overheat. Refer to the IC-317x
Specifications for temperature specifications.
To obtain the maximum allowable ambient temperature, you must mount the IC-317x
vertically. The following figures provide dimensional drawings and clearance information for
the IC-317x.
CONNECT Switch in Disconnected Position
Do not position the IC-317x with the heat sinks resting on any surface.
IC-317x User Manual | © National Instruments | 21