System Routing Table - TP-Link TL-WR850N User Manual

Chapter 4
2. Enter the following
• Destination IP Address
or host that you want to assign to a static route.
• Subnet Mask
the network portion, and which portion is the host portion.
• Gateway - This is the IP address of the default gateway device that allows the
contact between the router and the network or host.
3. Select Enabled or
4. Click Save.
You can also do the following operations to modify the current settings.
• Click the Enable Selected
• Click the Disable Selected
• Click the Delete Selected
4 10 2

System Routing Table

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Advanced Routing
entries in use.
• Destination Network
to which the static route is assigned.
• Subnet Mask - The Subnet Mask determines which portion of an IP address is the
network portion, and which portion is the host portion.
information.
- The Destination Network is the address of the network
- The Subnet Mask determines which portion of an IP address is
Disabled for this entry on the
button to enable selected entries..
button to disable selected entries.
button to delete selected entries.
> System Routing
- The Destination Network is the address of the network or host
Status drop-down list.
Table, and you can view all the valid route
Configure the Router
47