Local Management - TP-Link TL-WR850N User Manual

300mbps wireless n router
Hide thumbs Also See for TL-WR850N:
Table of Contents

Advertisement

Chapter 4
UDP-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current UPD-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
Enable TCP-SYN-FLOOD Attack Filtering
function.
TCP-SYN-FLOOD Packets Threshold (5~3600)
between 5 ~ 3600. When the number of the current TCP-SYN-FLOOD packets is
beyond the set value, the router will startup the blocking function immediately.
Forbid Ping Packet From WAN Port
Port. The default setting is enabled. The ping packet from WAN cannot access the
Router. (Defends against some viruses).
Forbid Ping Packet From LAN Port
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click Save.
4. Click
Blocked DoS Host List
4 7 3

Local Management

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to
Security
>
accessing the router.
For
example, if you want to allow PCs with specific MAC addresses to access the router's
web management page locally from inside the network, please follow the instructions
below:
1 ) Select
Only the PCs listed can browse the built-in web pages to perform
Administrator
2 ) Enter the MAC address of each PC separately. The format of the MAC address
is XX-XX-XX-XX-XX-XX (X is any hexadecimal digit). Only the PCs with the listed
- Enable or Disable Forbid Ping Packet From WAN
- The default setting is disabled. If enabled, the
to display the DoS host table by blocking.
Local
Management, and you can block computers in LAN from
tasks.
- The default value is 500. Enter a value
-Check the box to enable or disable this
- The default value is 50. Enter a value
Configure the Router
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents