TP-Link TL-WR850N User Manual page 19

Chapter 4
• IP Address - Enter the IP address in dotted-decimal notation provided by your ISP.
• Subnet Mask - Enter the subnet mask in dotted-decimal notation provided by your
ISP. Normally 255.255.255.0 is used as the subnet mask.
• Gateway - Enter the gateway IP address in dotted-decimal notation provided by your
ISP.
• MTU Size - The normal MTU (Maximum Transmission Unit) value for most Ethernet
networks is 1500 Bytes. It is not recommended that you change the default MTU size
unless required by your ISP.
• Primary/Secondary DNS
decimal notation provided by your ISP.
PPPoE
If your ISP provides PPPoE connection, select PPPoE.
• User Name/Password
These fields are case-sensitive.
- (Optional) Enter one or two DNS addresses in dotted-
- Enter the user name and password provided by your ISP.
Configure the Router
16