Wireless Security - TP-Link TL-WR850N User Manual

Chapter 4
2. Enter the router's current PIN on your client device to join the router's Wi-Fi network.
4 3 3

Wireless Security

1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to Wireless > Wireless
3. Configure the the security settings of your wireless network and click Save.
• Disable Wireless Security
If disabled, wireless clients can connect to the router without a password. It's strongly
recommended to choose one of the following modes to enable security.
• WPA-PSK/WPA2-Personal
shared passphrase.
• Authentication Type
• Encryption - Select Automatic,
• Wireless Password
the length should be between 8 and 64 characters; for ASCII, the length should
be between 8 and 63 characters.
• Group Key Update Period
The value can be 0 or at least 30. Enter 0 to disable the update.
Security.
- The wireless security function can be enabled or disabled.
- It's the WPA/WPA2 authentication type based on pre-
- Select Automatic,
TKIP or AES.
- Enter ASCII or Hexadecimal characters. For Hexadecimal,
- Specify the group key update interval in seconds.
Configure the Router
WPA-PSK or WPA2-PSK.
26