Setting The Clock/Setting And Using The Alarms - iHome iBT233V2 Instruction Manual

Setting the Clock
1. Press and hold the Time Set Button located on back of the unit for 2 seconds until the
clock display flashes and a beep sounds.
2. Press the or
Make sure you set the correct AM/PM time. The PM indicator appears to the left of the
display; there is no AM indicator.
3. Press the Time Set Button to confirm the time. The year will flash on the display.
4. Press the or
5. Press the Time Set Button to confirm the year. The month will flash on the display.
6. Press the or
7. Press the Time Set Button to confirm the month. The date will flash on the display.
8. Press the or
9. Press the Time Set Button to confirm the date and exit clock setting mode. 2 beeps will
confirm clock setting is complete.
TIP: To toggle the clock display between standard 12 hour time and 24 hour ("military") time
display, press the
setting.
Setting and Using the Alarms
This unit features dual alarms which can be set to di erent times and alarm sources. Each is set
in the same way. Instructions are given as "Alarm Button"; use
Button to set respective alarms.
Note: Each step must be completed while display is flashing or step will time-out with any
changes saved.
Buttons to adjust the clock to the current time (hold for rapid setting).
Buttons to adjust the clock to the current year (hold for rapid setting).
Buttons to adjust the clock to the current month (hold for rapid setting).
Buttons to adjust the clock to the current date (hold for rapid setting).
Alarm Button or
Using the
Alarm Button while the display is flashing during clock
7
iBT233V2
Alarm Button or Alarm