Setting And Using Fm Presets; Using The Voice Command Feature - iHome iBT233V2 Instruction Manual

Setting and Using FM Presets

The unit allows you to store up to 6 FM radio station presets
Press and release the FM Presets Button. The FM current FM station frequency
1.
appears on the display.
2. Press and release the FM Presets Button as needed until the preset number (P1- P6)
you wish to set is displayed, then press and hold the FM Presets Button for 2 seonds.
A beep will confirm you have entered preset setting mode.
3. Press the or
the next clear station).
4. Press and release the FM Presets Button. 2 beeps will sound to confirm the preset
has been assigned. Repeat steps 2 - 4 until you have set up to 6 preset stations.
5. To listen to a preset FM station at any time, follow steps 1 - 2 to turn on FM radio
mode and cycle to the desired preset.

Using the Voice Command Feature

NOTE: The unit must be powered on and linked to an iOS or Android Bluetooth device to
use Voice Command.
Press and hold the
for beep to activate voice command with Siri or Google Assistant.
Voice command requires an active internet connection on connected Bluetooth device with iOS
10 and Android 5.0 and later. When activated, the speaker microphone acts as an extension of
the microphone in your smartphone to make/take calls, enable you to ask Siri®/Google
Assistant™ to play music and more.
Buttons to tune the radio to the desired station (hold to scan for
Voice Command/Play/Pause Button for 2 seconds and wait
Using the
10
iBT233V2