Advertisement
FW-8894 User Manual
To access some components and perform certain service procedures, you must perform the following
procedures first.
Warning: 1. To reduce the risk of personal injury, electric shock, or damage to the equipment,
please remove all power sources. 2. Please wear ESD protected gloves before conducting the
following steps. 3. NOT pile any object onto the system.
1.
Power off FW-8894 and make sure the power cord is disconnected from the device.
2.
Remove the 3 circled screws at the rear of the top compartment and 2 from each side.
3.
Gently pull the cover backward.
4.
Open the cover from the side.
Advertisement
