Insignia NS-OTR16WH9 User Manual page 16

Microwave light (interior)
1 Disconnect power to the microwave at the circuit breaker or by unplugging it.
2 Remove the louver mounting screws from the top center of the louver, then push down on the tabs at each end
of the louver to disengage it.
3 Pull the louver away from the unit.
4 Open the light cover located behind the filter by removing the light cover screw, then carefully pulling up on the
front edge.
5 Remove the old light bulb, then replace with a new bulb.
6 Replace the microwave light cover by carefully pushing it into place.
7 Push the louver back into place and replace the louver mounting screws.
16
Louver mounting screws
CAUTION
Do not use a bulb larger than 30 watts.
www.insigniaproducts.com
NS-OTR16SS9 / NS-OTR16WH9
Louver
Light cover
Light cover screw
Louver