TiePie Handyscope HS5 series User Manual page 2

Hide thumbs Also See for Handyscope HS5 series:

Table of Contents

ATTENTION!

Measuring directly on the line voltage can be very dangerous.

The outside of the BNC connectors at the Handyscope HS5 are connected

with the ground of the computer. Use a good isolation transformer or a dif-

ferential probe when measuring at the line voltage or at grounded power

supplies! A short-circuit current will ﬂow if the ground of the Handyscope

HS5 is connected to a positive voltage. This short-circuit current can damage

both the Handyscope HS5 and the computer.

Revision 2.22, August 2018

Despite the care taken for the compilation of this user man-

ual, TiePie engineering can not be held responsible for any

damage resulting from errors that may appear in this man-

ual.

Table of Contents

Need help?

Do you have a question about the Handyscope HS5 series and is the answer not in the manual?