Timeguard TRT035N Operating Instructions Manual page 12

10.2 The Day of the week will flash (e.g. Mon), use the Up/Down arrow
buttons if you need to choose a different day of the week, and then
press the Select button once to confirm
Mon will flash
when selected
10.3 The Prog 1 (period 1) hour will flash, use the Up/Down arrow button to
choose the hour and press the Select button once to confirm.
11
The hour will flash
10.4 The minutes will flash, use the Up/Down arrow button to choose
the minutes and press the Select button once to confirm.
10.5 The temperature will flash, use the Up/Down arrows to choose
the temperature (the temperature increments are in 0.5° steps)
and press the Select button once to confirm.
10.6 The Prog 2 (period 2) hour will flash. Follow steps '10.3' to '10.5' for
Prog 2 (period 2) through to Prog 6 (period 6)
10.7 Press the Set button once to change the day of the week (e.g. Tue). Use
the Up/Down Arrows to choose the day of the week, and press the Select
button once to confirm.
10.8 Follow steps '10.3' to '10.7' until you have programmed each day of the
week that you require.
10.9 Press the Set button three times to exit the programme entry mode.
Use the Up/Down arrow
buttons to change
the day of the week
Use the Up/Down arrow
buttons to change the hour
Use the Select
button to confirm
Use the Select
button to confirm