Timeguard TRT034N Operating Instructions Manual page 14

7 day digital programmer 1 channel – surface mount
Table of Contents

Advertisement

10.13 Use the Up/Down arrow buttons to choose the day of the week you
wish to copy the Programme to e.g. Tue, and press the Select button
once to confirm.
Use the Up/Down arrows to
choose the day you wish to copy
the Programme to e.g. Tue
10.14 Use the Up/Down arrow buttons to choose the next day of the week
you wish to copy the Programme to e.g. Wed, and press the Select
button once to confirm.
13
Use the Up/Down arrows to
choose the next day you wish to
copy the Programme to e.g. Wed
10.15 Repeat step 10.14 until you have copied the programme to all
of the days of the week that are required.
10.16 Press the Set button twice to exit the programme entry.
Note:
If no button is pressed, it will time out after 60 seconds and return
to the mains screen showing day, time and output status.
The display light will also time out after 15 seconds after the last
button is pressed.
The Set button can be pressed twice to exit the copy function
at any stage.
Copy and the day of
the week will flash
Copy and the day of
the week will flash
Use the Select button
to confirm and copy
the Programme
Use the Select button
to confirm and copy
the Programme

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TRT034N and is the answer not in the manual?

Table of Contents

Save PDF