Changing The Display; Using Optional Equipment - Sony MHC-ESX9 Operating Instructions Manual

Changing the display

Changing the display mode
Press DISPLAY repeatedly while
the system is turned off.
Demonstration
The display changes and the indicator
flashes even when the system is turned
off.
No display (Power Saving Mode)
The display is turned off to conserve
power. The timer and clock continue to
operate. You cannot turn on the system by
pressing the function buttons.
Clock
The clock display automatically turns to
Power Saving Mode after a few seconds.
Changing the illumination
brightness
(MHC-ESX9/ESX8 only)
1
Press OPTIONS on the unit.
2
Press ./> repeatedly to
select "ILLUM", then press
ENTER.
3
Press ./> repeatedly to
select the setting you want, then
press ENTER.
To exit the options menu, press
OPTIONS on the unit.
Viewing information in the
display panel
Press DISPLAY repeatedly when
the system is turned on.
You can view the information as follows:
• For AUDIO CD:
– The elapsed playing time and
remaining playing time during
playback.
– The total playing time when playback
is stopped.
• For audio files:
– The elapsed playing time, file name
and folder name.
– The title, artist and album information.
Note
The elapsed playing time of an audio file
encoded using a VBR (variable bit rate) is not
displayed correctly.
Using optional
equipment
1
Press VOLUME – repeatedly
until "VOL MIN" appears in the
display panel.
2
Connect an optional audio/video
equipment to the DVD/PC IN L/R
jacks on the unit using an audio
analog cord (not supplied).
3
Press FUNCTION repeatedly to
select "DVD/PC".
4
Start playing the connected
equipment and adjust the
volume.
GB
17