Related Manuals for Sony MHC-ESX9
Summary of Contents for Sony MHC-ESX9
- Page 1 4-463-332-12(1) HOME AUDIO Getting Started SYSTEM Disc/USB Playback USB Transfer Operating Instructions Tuner Other Operations Additional Information MHC-ESX9/ESX8/ESX6...
- Page 2 License and Trademark Notice WARNING • “WALKMAN” and “WALKMAN” logo To reduce the risk of fire or electric are registered trademarks of Sony shock, do not expose this apparatus Corporation. to rain or moisture. • MPEG Layer-3 audio coding technology...
-
Page 3: Table Of Contents
Table of Contents Guide to parts and controls ..4 Other Operations Adjusting the sound ....16 Getting Started Using the timers ......16 Hooking up the system Changing the display....17 securely ........7 Using optional equipment ..17 Setting the clock......9 Deactivating the buttons on the unit (Child Lock)....... -
Page 4: Guide To Parts And Controls
Guide to parts and controls This manual mainly explains operations using the remote control, but the same operations can also be performed using the buttons on the unit having the same or similar names. Unit Note When pressing the buttons on the unit, press on the printings of the buttons. - Page 5 Remote control RM-SCU37B REC TO USB Transfer onto the optional USB device which is connected to the port. ENTER Enter the settings. OPTIONS (page 10, 14, 17) Enter or exit the options menus. +/– (select folder) Select a folder on an MP3 disc or a USB device.
- Page 6 Unit: NX (play/pause) PLAY MODE/TUNING MODE Remote control: N (play), Select the play mode of an AUDIO CD, MP3 disc or a USB device (page 10, 13). X (pause) Select the tuning mode (page 15). Start or pause playback. To resume playback, press NX or N. DISPLAY x (stop) Change the information on the display...
-
Page 7: Getting Started
Getting Started Hooking up the system securely B is different depending on the model. See below. 1 To speaker (right) MHC-ESX9 MHC-ESX8 MHC-ESX6 2 To speaker (left) 3 To HIGH channel (right) 4 To HIGH channel (left) 5 To LOW channel (right) - Page 8 Note When you unplug the power cord, it may take AM loop antenna awhile before the display turns off. B Speakers Inserting batteries (MHC-ESX9) Insert the two supplied R6 (size AA) Example: batteries, matching the polarities shown below. White Purple...
-
Page 9: Setting The Clock
Setting the clock Disc/USB Playback You cannot set the clock in Power Saving Playing a disc Mode. Press CD. Press "/1 to turn on the system. Press Z on the unit to open the Press CLOCK/TIMER SET. disc tray. If “PLAY SET” appears in the display Load a disc with the label side panel, press ./>... -
Page 10: Before Using The Usb Device With This System
– WMA: file extension “.wma” devices. – AAC: file extension “.m4a”, “.mp4” or “.3gp” For customers in Latin America: <http://esupport.sony.com/LA> If the audio files have the above file For customers in other countries/regions: extension but are not the respective <http://www.sony-asia.com/support>... - Page 11 Press ./> repeatedly to Playing in random order select the track or audio file you (Shuffle Play) want, then press ENTER. Press PLAY MODE repeatedly when playback is stopped. • SHUF: shuffle a disc or a USB device • FLDR SHUF*: shuffle all audio files in Selected track Total playing time of the folder on a disc or a USB device...
-
Page 12: Usb Transfer
Playing repeatedly (Repeat USB Transfer Play) Transferring music Press REPEAT repeatedly. • : repeat all tracks or audio files You can transfer music from a disc • : repeat a track or audio file (AUDIO CD or MP3 disc only) to a USB device. - Page 13 Press ./> repeatedly to Press REC TO USB on the unit. select the bit rate you want, then “PUSH ENTER” appears in the press ENTER. display panel. • 128 kbps: encoded MP3 tracks have Press ENTER. smaller file size and lower audio quality.
- Page 14 To create a new MP3 file • CD-TEXT information is not transferred in the created MP3 files. Press REC TO USB during Analog • Transferring stops automatically if: Transfer. – the USB device runs out of space during “NEW TRACK” appears in the display transferring.
-
Page 15: Tuner
To change the AM tuning interval Tuner The default setting for AM tuning interval is 9 kHz (or 10 kHz for some areas). You Listening to the radio cannot change the AM tuning interval in Power Saving Mode. Use the buttons on the unit to perform this Press TUNER/BAND repeatedly operation. -
Page 16: Other Operations
Press ./> repeatedly to Other Operations select “PLAY SET”, then press ENTER. Adjusting the sound Set the time to start playback. Press ./> repeatedly to set the Do this hour/minute, then press ENTER. Reinforce the Press BASS BAZUCA on bass and create the unit. -
Page 17: Changing The Display
Power Saving Mode after a few seconds. Using optional Changing the illumination brightness equipment (MHC-ESX9/ESX8 only) Press VOLUME – repeatedly until “VOL MIN” appears in the Press OPTIONS on the unit. display panel. Press ./> repeatedly to Connect an optional audio/video select “ILLUM”, then press... -
Page 18: Deactivating The Buttons On The Unit (Child Lock)
Note Additional Information Make sure to turn down the volume to minimum level before connecting or disconnecting the equipment. Otherwise, noise may be generated, Playable discs the system may malfunction, or “PROTECT EXX” may appear in the display panel • AUDIO CD (page 19). -
Page 19: Troubleshooting
Compact Disc (CD) standard, playback If the problem persist, consult your on this product is not guaranteed. nearest Sony dealer. Music discs encoded with copyright Note that if the service personnel changes some parts during repair, these parts may protection technologies be retained. - Page 20 • Connect the unit to a different wall “LOCKED” appears in the display outlet. panel. • Install a noise filter (commercially • Consult your nearest Sony dealer or available) to the power cord. local authorized Sony service facility. • Turn off surrounding electrical equipment.
- Page 21 • The ID3 tag is not Version 1(1.0/1.1) • The USB device was disconnected or and Version 2(2.2/2.3). the power was turned off during the • The character code that can be displayed erase operation. Delete the partially- by this system are as follows: erased file.
- Page 22 • Connect a commercially available USB device, then turn on the system. external antenna. • Check the information on the websites • Consult your nearest Sony dealer if the about compatible USB devices supplied AM antenna has come off from (page 10).
-
Page 23: Messages
NO SUPPORT Messages An unsupported USB device is connected. NO TRACK One of the following messages may No playable file is loaded in the system. appear or flash in the display panel during NOT USE operation. You tried to perform a specific operation CANNOT PLAY under conditions where that operation is prohibited. -
Page 24: Precautions
On placement Precautions • Do not place the system in an inclined position or in locations that are extremely hot, cold, dusty, dirty, or humid or lacking When carrying the unit adequate ventilation, or subject to vibration, Perform the following procedure to direct sunlight or a bright light. -
Page 25: Specifications
WMA: 48 kbps – 192 kbps The following are measured at AAC: 48 kbps – 320 kbps Mexican model: Sampling frequencies MHC-ESX9/ESX8: MP3 (MPEG 1 Audio Layer-3): AC 120 V – 240 V, 60 Hz 32/44.1/48 kHz MHC-ESX6: WMA: 44.1 kHz AC 127 V, 60 Hz AAC: 44.1 kHz... - Page 26 Speakers Mass (Approx.) 3.0 kg Front Speaker Quantity: 2 pieces SS-ESX9 for MHC-ESX9 General Speaker system Power requirements 3-way 3-driver speaker system, Bass Mexican model: reflex MHC-ESX9/ESX8: Speaker unit AC 120 V – 240 V, 60 Hz Tweeter: 40 mm, cone type...
- Page 28 ©2013 Sony Corporation Printed in China...