Display; Changing The Spectrum Analyzer Display; Adjusting The Brightness Of The Display; Changing The Power Illuminator - Sony MHC-GN700 Operating Instructions Manual

Display

Changing the spectrum
analyzer display
1
Press AMP MENU.
"SPECTRUM" appears in the display.
2
Press PUSH ENTER (or ENTER on the
remote).
The last selected spectrum appears.
3
Press < or , repeatedly to select the
setting you want.
The display changes as follows:
SPECTRUM 1T t SPECTRUM 2
Y
SPECTRUM OFF
R
t SPECTRUM 4 T
4
Press PUSH ENTER (or ENTER on the
remote).
Adjusting the brightness
of the display
1
Press AMP MENU.
"SPECTRUM" appears.
2
Press M or m repeatedly to select
"DIMMER", then press PUSH ENTER
(ENTER on the remote).
The last selected dimmer appears.
3
Press < or , repeatedly to select the
setting you want.
The display changes as follows:
t DIMMER 1 y DIMMER 2 T
tDIMMER 3T
4
Press PUSH ENTER (or ENTER on the
remote).
Changing the power
illuminator
You can select the power illuminator as you
want.
Press ILLUMINATION repeatedly to select
the power illuminator you want when the
system is turned on.
Each time you press the button, the power
illuminator mode changes cyclically as follows:
PATTERN 1 t PATTERN 2 t PATTERN 3
t PATTERN 4 t PATTERN OFF
Notes
• When you turn VOLUME (or press VOL +/– on the
Y
remote), power illuminator shows the current
SPECTRUM 3
volume level.
R
• During the demonstration display, you can turn on
or off power illuminator by pressing
ILLUMINATION.

Turning off the display

— Power Saving Mode

The demonstration display and the clock
display can be turned off to minimize the
amount of power consumed during standby
mode (Power Saving Mode).
Press DISPLAY repeatedly while the
system is turned off until the
demonstration display or the clock display
disappears.
To cancel Power Saving Mode
Press DISPLAY once to show the
demonstration display or twice to show
the clock display.
Each time you press the button, the system
changes cyclically as follows:
Demonstration
Mode
1)
The display changes and the indicators flashes even
when the system is turned off.
2)
"--.-- " appears in the display if you have not set the
clock.
1) 2)
t Clock t Power Saving
continued
MHC-GN800 4-244-569-81 (1)
GB
23