Before Using The Usb Device With This System; Playing A Usb Device; Using Play Mode - Sony MHC-ESX9 Operating Instructions Manual

Before using the USB
device with this system
Check the websites below for the
information about compatible USB
devices.
For customers in Latin America:
<http://esupport.sony.com/LA>
For customers in other countries/regions:
<http://www.sony-asia.com/support>
To select the playback source or
transferring destination (USB
memory select)
If the USB device has more than one
memory (for example, internal memory
and a memory card), you can select which
memory to use as a playback source or
transferring destination.
Note
You cannot select a memory during playback or
transferring. Make sure to select a memory
before starting playback or transferring.
1
Connect a USB device to the
port on the unit.
2
Press USB.
3
Press OPTIONS on the unit when
playback is stopped.
4
Press ./> to select "MEM
SEL", then press ENTER.
5
Press ./> to select the
memory you want, then press
ENTER.
6
Start playback the audio files of the
selected memory or start
transferring.
GB
10

Playing a USB device

The audio formats that can be played back
by this system are as follows:
– MP3: file extension ".mp3"
– WMA: file extension ".wma"
– AAC: file extension ".m4a", ".mp4" or
".3gp"
If the audio files have the above file
extension but are not the respective
formats, the system may produce noise or
may malfunction.
1
Press USB.
2
Connect a USB device to the
port on the unit.
3
Press N.
Notes on USB device
• This system can recognize up to
– 250 audio files in a folder.
– 3,000 audio files in a USB device.
– 1,000 folders in a USB device (including
root folder).

Using play mode

Playing in original order
(Normal Play)
Press PLAY MODE repeatedly when
playback is stopped.
• (blank): play a disc or a USB device
• FLDR*: play all audio files in the folder
on a disc or a USB device
* When playing an AUDIO CD, "FLDR"
performs the same operation as "(blank)" Play
mode.