Cleaning And Maintenance Information; Display; Charging And Communication Contacts - Pepperl+Fuchs IPT-HH27 Quick Start Manual

RFID Handheld Reader
18

Cleaning and Maintenance Information

Clean the device by placing it firmly onto a surface (e.g. table). This ensures a secure hold and
the device cannot slip out of your hand during the cleaning process.
Warning!
Do not use any corrosive chemicals, cleaning solutions or strong cleaning agents in order to
clean the device.
18.1

Display

If required, clean the display with a soft, dry cloth. In order to do, always switch off the device
as the display responds to all contact and could therefore compromise or interfere with the
active program. Do not apply any severe pressure on the display.
18.2

Charging and communication contacts

If transfer problems occur, clean the charging and communication contacts with a soft, moist
cloth.
When dealing with the devices, the power plug must be disconnected beforehand.
33