Safety Information; General Safety Instructions For Handling The Device - Pepperl+Fuchs IPT-HH27 Quick Start Manual

RFID Handheld Reader
14

Safety Information

14.1

General safety instructions for handling the device

Read the following information. It serves to ensure your safety as well as the operational
readiness of the device.
Warning!
Only original power supply units and approved batteries must be used for the operation of the
system. The utilization of non-approved components can lead to the destruction of the device.
Remove the battery from the device if it is not used for an extended period of time.
Warning!
The battery is a lithium polymer battery pack. Lithium polymer battery packs can explode if
exposed to fire. Do not disassemble the battery pack and do not expose it to fire or heat
(greater than 60 °C/140 °F).
Warning!
Only operate the touchscreen using the fingertips or with the touch-pen attached to the retainer
strap on the rear. Never use a pen or other sharp objects.
Warning!
Never position the device in close proximity to heat sources (heating fans or similar equipment)
and never expose it to direct sunlight, excessive dust sources or shocks.
Warning!
The touch pen may only be used for operation of the touch screen. It should not be used for
any other purposes.
Warning!
In order to prevent excessive heat, the handheld terminal, as well as the docking station and
the power pack must not be covered while in use.
Warning!
Prior to each use, the handheld terminal, the docking station and the connection cables must
be inspected for damages. Damaged parts must be replaced. Please contact Pepperl+Fuchs
in either case.
25