Whirlpool AWG812/PRO Health & Safety, Use & Care And Installation Manual page 198

DOSING AID
START DELAY
198
Helps to dose the right amount of
detergent for your laundry load .
Before using this option:
The concentration of detergents
available on the market differs
considerably . For that reason, adapt
the washing machine to the dosing
amounts of the detergents which you
use .
Furthermore, check if the washing
machine's preset water hardness level
Moves the start of your programme
to a later time . Helps to profit from
more favourable energy rates
(e .g .during the night), or to have the
laundry ready at a certain time .
Choose a delay up to 23 hours . Do
not use liquid detergent with this
function, to ensure that the detergent
stays in the detergent dispenser until
programme start .
• Select programme, temperature
and options .
• Press the "Start delay" button
– the start delay symbol on
the display blinks .
• Turn the knob to select a delay up
to 23 hours, which will be shown
on the display . Confirm the desired
delay by pressing the knob . The
start delay symbol on the display
lights up solidly .
(soft) corresponds to your local water
hardness level – if not adapt it (see
"DOSING AID / FIRST USE") .
See separate section Dosing Aid – First
use / Daily use
Press Start / Pause - the display shows
the countdown of the delay
until start of the programme .
The Start/Pause button lights up . The
colon between hours and minutes on
the display blinks . The door locks .
• If you have selected Dosing Aid, the
washing machine will calculate the
recommended detergent amount
after you have pressed Start/
Pause . Add the detergent amount
indicated on the display into the
detergent dispenser; use powder
detergent, to make sure that the
detergent stays in the dispenser
until start of the programme . Close
the dispenser and press Start/Pause
again, to start the countdown of the
selected delay .
• After the delay has expired,
the washing machine starts
automatically . The display then
indicates the remaining programme
duration .
To cancel the delay:
• press Start/Pause to cancel the start
delay (and press "Start/Pause" again
to start the selected programme
immediately, if desired)
• or press and hold On/Off to cancel
the complete programme setting .