Whirlpool AWG812/PRO Health & Safety, Use & Care And Installation Manual page 196

SPIN
RINSE HOLD
196
If you switch on the washing
machine, the last used programme
and spin speed setting will appear on
the control panel .
If you change the programme, the
default spin speed of the selected
programme will appear on the
display .
To avoid automatic spinning of the
laundry at the end of the programme .
The laundry remains in the last rinse
water, the programme does not
proceed .
Suitable for delicate laundry which
is not appropriate for spinning, or
which should be spun with a lower
spin speed .
Not appropriate for silk .
To terminate the "Rinse hold", choose
between:
• draining the water, no spinning:
turn the knob to select spin speed
"0", then press "Start/Pause": the
water will be drained and the
programme ended
• spinning the laundry:
the default spin speed blinks - start
the spin cycle by pressing "Start/
Pause" . Or select a different spin
speed by turning the knob, press it
to confirm the selected spin speed,
and press Start/Pause to start the
spin cycle
If you want to change the spin speed,
press the Spin button, turn the knob
to select the desired spin speed and
press the knob to confirm .
If you select spin speed "0", the rinse
water will be drained at the end of
the programme, and there will be no
final spin cycle .