Whirlpool AWG812/PRO Health & Safety, Use & Care And Installation Manual page 190

8.
CHANGE THE SETTINGS OF A RUNNING
PROGRAMME, IF NEEDED
It is possible to change the settings while a
programme is running . The changes will be
applied, provided the respective programme phase
has not finished yet .
• Press the relevant button (for example the "Spin
speed" button to change the spin speed) . The
selected value blinks for a few seconds .
• While blinking, you can adjust the setting
by turning the knob . If the value stopped
blinking and you have not yet done the desired
modification, press the button again .
• Press the knob to confirm the modification . If
you do not confirm, the modification will be
confirmed automatically – the modified setting
will stop blinking .
The programme will proceed automatically after
you have changed the setting . To prevent that
a running programme is changed by accident
(for instance by children), use the "Key lock"
(see paragraph PROGRAMMES, OPTIONS AND
FUNCTIONS).
To change the settings of a running programme,
you can also
• Press "Start/Pause" to put the running
programme on pause
• Change your settings
• Press "Start/Pause" again to continue the
programme .
If you have changed the programme, do not add
detergent for the new programme .
190
9.
PAUSE A RUNNING PROGRAMME
AND OPEN THE DOOR, IF NEEDED
Press "Start/Pause" to interrupt a running
programme
• Provided water level or temperature is
not too high, the "door open"
indicator lights up . You can open the
door, for example to add more laundry, or to
remove laundry which was loaded by mistake .
• Press "Start/Pause" to proceed with the
programme
10.
RESET A RUNNING PROGRAMME, IF
NEEDED
• Press and hold the On/Off button until the
display shows "rES" . The water drains and the
programme is ended . The door unlocks .
11.
SWITCH OFF THE WASHING MACHINE
AFTER PROGRAMME END
• „End" will appear on the display, and the Door
open indicator will light up – you can take out
your laundry
• Press "On/Off" to switch off the washing machine .
If you do not switch it off, the washing machine
will switch off automatically after a quarter of an
hour after programme end, to save energy .
• Leave the door ajar, so that the inside of the
washing machine can dry .