Whirlpool AWG812/PRO Health & Safety, Use & Care And Installation Manual page 189

Select options, if needed
If you want to select additional options,
make sure that the options button lights
up . The options which are selectable for your
programme are indicated by lighting arrows .
Turn the knob to select the desired options .
The symbol of the selected option blinks . To
confirm it, press the knob .
Some options / functions can be selected by
directly pressing the button:
Refer to section PROGRAMMES, OPTIONS AND
FUNCTIONS for more information .
INDIVIDUAL MODE
After you have switched on the washing machine,
you are not forced to follow the GUIDED MODE .
It is up to you which order you choose to set your
programme . To do a setting, first press the relevant
button, then turn the knob to select, and finally
press the knob to confirm .
The range of temperatures, spin speeds and
options depend on the programme selected .
Therefore it is recommended to start your setting
with selecting the programme .
6.
ADD DETERGENT
• If you do not use the Dosing Aid function,
pull out the detergent dispenser and
add detergent (and additives/softener) now, as
indicated in section DETERGENT DISPENSER .
Observe the dosing recommendations on the
detergent pack . If you have selected PREWASH or
START DELAY, observe the instructions in section
PROGRAMMES, OPTIONS AND FUNCTIONS.
Afterwards carefully close the detergent
dispenser again .
• If you use the "Dosing Aid" function, add
detergent later, after you have started the
programme . Refer to section DOSING AID/DAILY
USE.
Correct dosing of detergent / additives is
important, because
• it optimizes the cleaning result
• it avoids irritating residues of surplus detergent in
your laundry
• it saves money by avoiding waste of surplus
detergent
• it protects the washing machine by avoiding
calcification of components
• it respects the environment by avoiding
unnecessary environmental burden
7.
START PROGRAMME
Press and hold Start/Pause until the button
lights up solidly; the programme will start .
• If you have selected "Dosing Aid", the washing
machine will indicate the recommended
detergent amount for your laundry load after
programme start . – Add detergent to the main
wash compartment of the detergent dispenser,
close the dispenser and press "Start/Pause" to
proceed with the programme
• If you have selected "Dosing Aid" and also
"Prewash", add the indicated detergent amount
to the main wash compartment, and half of the
indicated detergent amount also to the Prewash
compartment .
• Close the detergent dispenser and press "Start/
Pause" to proceed with the programme . To avoid
overflow, do not open the detergent dispenser
anymore .
• The remaining programme duration which is
indicated on the display can vary . Factors like
unbalance in the wash load, or foam formation,
can have an effect on the programme duration .
Whenever the remaining programme duration is
calculated newly, an animation appears on the
display .
EN
189