Removing The Led Pcb; Removing The Fan - Canon D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Fan

Removing the LED PCB

1) Open the feeder cover.
2) Open the DADF.
3) Detach the front cover.("Removing the Front Cover"(page
4) Close the DADF.
5) Remove the LED PCB.
- Screw 1 pc
- Connector 1 pc
x1
x1
4 Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Fan
4-13).)
F-4-45

Removing the Fan

1) Open the feeder cover.
2) Remove the rear cover.("Removing the Rear Cover"(page
3) Remove the fan
- Screw 1 pc
- Connector 1 pc
x1
x1
Caution
Install the fan with the arrow oriented as shown.
4-22
4-13).)
F-4-46
F-4-47
4-22