Removing The Sensor(Sr1,Sr2,Sr3) - Canon D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Sensor(SR1,SR2,SR3)

Removing the Sensor(SR1,SR2,SR3)

1) Remove the DADF from the host machine.
- Screw 2 pcs.
2) Open the feeder cover.
3) Detach the front cover.("Removing the Front Cover"(page
4) Remove the feeder cover.("Removing the Rear Cover"(page
5) Remove the tray holder.
- Screw 1 pc.
x1
6) Remove the rear cover.("Removing the Rear Cover"(page
7) Disconnect the nine connectors from the ADF driver PCB.
x9
4 Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the Sensor(SR1,SR2,SR3)
4-13).)
4-13).)
F-4-48
4-13).)
F-4-49
8) Remove the document tray.
- Connector 1 pc
- Screw 1 pc
x1
x1
9) Remove the ADF motor ("Removing the ADF Motor(M1)"(page
10)Remove the left hinge.(Refer to page 4-15)
11)Remove the harness guide
- Connector 5 pcs.
- Screw 1 pc
x1
x5
4-23
F-4-50
4-19).)
F-4-51
4-23