Removing The Adf Driver Pcb - Canon D1 Service Manual

4
Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the ADF Driver PCB
4) Remove the clutch
- Resin ring 1 pc
- Bearing 1 pc
White
CL1
W
Caution
Install the pickup clutch with the clutch gear (white) aligned with the mark "W" (white)
on the clutch support plate.
Install the registration clutch with the gear (black) aligned with the mark "B" (black) on
the clutch support plate.
4 Parts Replacement and Cleaning Procedure > Clutch Solenoid Motor Fan PCB (DADF) > Removing the ADF Driver PCB
Black
CL2
B
F-4-43

Removing the ADF Driver PCB

1) Open the feeder cover.
2) Remove the rear cover.("Removing the Rear Cover"(page
3) Remove the ADF driver PCB.
- Connector 11 pcs
- Screw 2 pcs.
x2
x11
4-21
4-13).)
F-4-44
4-21