Deleting A Receiving Frequency, Emptying A Frequency Memory - Sennheiser EM 3532-U Instructions For Use Manual

13

Deleting a receiving frequency, emptying a frequency memory

You can empty a frequency memory if you enter three "hyphens" when assigning a channel
number.
The last frequency stored cannot be deleted. If you try to delete the last frequency stored,
the display briefly indicates "LASt" and then switches back to the standard display.
You can discontinue the programming of this menu by briefly (!) pressing the
display briefly indicates "ESC" and then switches back to the standard display. The previous settings
are kept.
If you do not press any of the three programming buttons for more than 30 seconds, the setting
mode is automatically left. The display briefly indicates "ESC" and then switches back to the
standard display. The previous settings are kept.
For some countries, this menu is locked via a special configuration program, since not all tunable
receiving frequencies are approved in these countries. If the "FREQUENCY" menu is selected, "Loc"
appears on the display.
54
SET button. The