Sennheiser EM 3532-U Instructions For Use Manual page 17

Sennheiser instructions for use twin receiver em 3532-u

Hide thumbs Also See for EM 3532-U:

Table of Contents

With the

frequency memory has been assigned a channel number, this is also indicated. If no channel

number has been assigned, three "hyphens" appear on the display, indicating that the frequency

memory is empty (see chapter 13).

Have you set the frequency memory correctly? Press the

appears on the display.

You now have to assign the frequency memory a channel number (from 001 to 255). With

larger systems, it is recommended to use the same channel numbers for both transmitters

and receivers in order to provide for simpler monitoring of the system. With the

buttons you can now select the desired channel number:

Have you set the channel number correctly? Press the

on the display. The display then switches back to the standard display.

Only now does the receiver change to the new frequency / channel.

For some countries, this menu is locked via a special configuration program, since not all tunable

receiving frequencies are approved in these countries. If the "FREQUENCY" menu is selected, "Loc"

appears on the display.

buttons you can now select a frequency memory (nos. 1 to 32). If the

SET

button until "Sto" briefly

SET

button until "Sto" briefly appears

Table of Contents

Show Quick Links

Table of Contents