Squelch (Muting) - Sennheiser EM 3532-U Instructions For Use Manual

15

Squelch (Muting)

The EM 3532 receiver is equipped with an adjustable squelch which eliminates annoying noise
when the transmitters are switched on and off. It also suppresses sudden noise when a transmitter
leaves the reception area and there is no longer sufficient transmitter power received by the receiver.
The adjustment of the squelch is via the "SQUELCH" menu. The adjustment range is between 0
and 134 (on the display), which corresponds to 0 to up to 100 μV. When the squelch is active, the
display "MUTE" is lit up on the display panel. If set to position "0", the squelch is switched off.
Press the /
dot on the left of the text SQUELCH begins to flash and the current value of the squelch
is shown on the alphanumeric main display and in the deviation bargraph. For the exact
value in μV please refer to the RF level bargraph on the left of the deviation bargraph:
With the /
Only after having been stored does the new squelch treshold become effective. To store a
setting, press the
setting has been stored. The display then switches back to the standard display.
You can discontinue the programming of this menu by briefly (!) pressing the
display briefly indicates "ESC" and then switches back to the standard display. The previous settings
are kept.
If you do not press any of the three programming buttons for more than 30 seconds, the setting
mode is automatically left. The display briefly indicates "ESC" and then switches back to the
standard display. The previous settings are kept.
56
buttons to select the "SQUELCH" menu. Then press the
buttons you can now select a squelch threshold between 0 and 134.
SET button until "Sto" briefly appears on the display, indicating that your
SET button. The LC
SET button. The