Deactivating The Lock Mode Temporarily; Activating/Deactivating The Rf Signal - Sennheiser evolution wireless ew 300 IEM G3 Instruction Manual

Using the transmitter
18

Deactivating the lock mode temporarily

You can activate or deactivate the automatic lock mode via the
lock mode is activated, you have to temporarily deactivate it In order to be able to operate
the transmitter:
Press the jog dial.
"Locked" appears on the display panel.
Turn the jog dial.
"Unlock?" appears on the display panel.
Press the jog dial.
The lock mode is temporarily deactivated:
When you are in the operating menu
The lock mode remains deactivated until you exit the operating menu.
When the standard display is shown
The lock mode is automatically activated after 10 seconds.
The lock mode icon flashes prior to the lock mode being activated again.
B.Ch: 1 1
ew300IEM
516.000 MHz
EQ
Standard -18dB

Activating/deactivating the RF signal

To deactivate the RF signal:
When the standard display is shown on the display panel, press the
button.
"RF Mute On?" appears on the display panel.
Press the jog dial.
The RF signal is deactivated.
display and the display is backlight in red.
To activate the RF signal:
Press the STANDBY
"RF Mute Off?" appears on the display panel.
Press the jog dial.
The RF signal is activated and the display backlighting changes from red to
orange.
You can also deactivate the RF signal on switch-on. For more information, refer to
the chapter "Switching the transmitter on/off" on page 13.
"RF Mute" flashes in alternation with the standard
button.
"Auto Lock" menu item. If the
STANDBY