If a problem occurs ...
Problem
Audio signal is distorted
If a problem occurs that is not listed in the above table or if the problem cannot be solved with the proposed solutions,
please contact your local Sennheiser partner for assistance. To find a Sennheiser partner in your country, search at
www.sennheiser.com under "Service & Support".
For accessories, visit the ew G3 product page at www.sennheiser.com.
24
Possible cause
If
"AF
PEAK" additionally appears on the
transmitter display:
transmitter sensitivity is adjusted too
high
Receiver's audio output level is adjusted
too high
Possible solution
Adjust the transmitter sensitivity correctly.
Reduce the audio output level
(see the instruction manual of the receiver).