Sennheiser evolution wireless ew 300 IEM G3 Instruction Manual page 12

Putting the transmitter into operation
Rack mounting two
transmitters
10
Connect the antenna. You have the following options:
– You can connect the supplied rod antenna
page 9). In this case, insert the two blanking plugs
plate (see diagram on page 9).
– You can use the AM 2 antenna front mount kit (optional accessory) and mount the rod
antenna to the blanking plate
– You can use a remote antenna, if necessary in conjunction with the AC 3 antenna
combiner.
Slide the transmitter with the mounted blanking plate
Secure the rack mount "ear"
To mount two transmitters into a rack using the GA 3 rack adapter:
Place the two transmitters side by side upside-down onto a flat surface.
Secure the jointing plate
Secure the rack mount "ears"
To mount the antennas:
Use remote antennas, if necessary in conjunction with the AC 3 antenna combiner.
For more information, visit the ew G3 product pages at www.sennheiser.com.
To mount the transmitters into the rack:
Slide the transmitters into the 19" rack.
Secure the rack mount "ears" to the 19" rack.
to the rear of the transmitter (see
.
and the blanking plate
to the transmitters using six recessed head screws (M 3x6).
to the transmitters as described on page 8.
into the holes of the blanking
into the 19" rack.
to the 19" rack.