Hogtunes FLSK 225-AA Installation Manual

Amplifier and lowers speaker kit

Enlarged version

HOGTUNES

Audio Solutions For The Great American Cruiser

Designed and Engineered in Canada For

Any audio system can be a distraction to the rider

and/or passenger. Please use caution when

FLSK 225-AA

playing your stereo, especially in traffic.

Installation Manual

The REV 225-AA Amplifier In This Kit

Features The Hogtunes Proprietary Circuit

"Reduced EMI Technology" For Superior FM

Reception From A "Class D" Amplifier

Adds 5.25" Speakers Into HD Fairing

www.hogtunes.com

Lower Glove Boxes on 1998-2013 Bikes

Harley-Davidson, Electra Glide, Road Glide, Street Glide, Ultra Classic, Tri Glide, CVO, and Screamin' Eagle are

Trademarks, and/or Registered Trademarks of Harley-Davidson, Inc., Milwaukee, Wisconsin, USA, and if Used

or Implied are for Reference Only. There is No Affiliation Between Harley-Davidson, Inc., and Hogtunes Inc.

Version 1.1

Table of Contents

Need help?

Do you have a question about the FLSK 225-AA and is the answer not in the manual?

Page 1 Harley-Davidson, Electra Glide, Road Glide, Street Glide, Ultra Classic, Tri Glide, CVO, and Screamin’ Eagle are Trademarks, and/or Registered Trademarks of Harley-Davidson, Inc., Milwaukee, Wisconsin, USA, and if Used or Implied are for Reference Only. There is No Affiliation Between Harley-Davidson, Inc., and Hogtunes Inc. Version 1.1...
Page 2: Technical Specifications
Products found to be defective during the warranty of the radio already, and the amp in this kit will not fit, you can use Hogtunes period will be repaired or replaced (with a product deemed to be equivalent) 2CHSP (Drag Specialties Part # 4405-0234) mounting plate to relocate the amp at Hogtunes sole discretion.
Page 3 Cut the hook and loop adhesive in half and apply on either side of the bump. Step#5: Locate the silver “posts” with the hex key opening and put silver lock The amplifier will then mount flush. Note: Most adhesives work best at room washers and washers on them.
Page 4 Step #7: The red and black power wires, and the wires marked “Clutch Side” Fairing Lower Speaker Kit Installation and “Brake Side” of the lower speaker wire harness will pass under the inner fairing where the throttle and idle and/or bikes main wire harness pass Step #1: Remove access covers from the glove boxes.