JVC HR-XVC1U User Manual page 33

Stereo Recording and Playback / Separate Audio Program (SAP)
Stereo Recording and
Playback
The VHS Hi-Fi audio system permits high
fidelity recording of MTS STEREO TV
broadcasts.
TV CATV
SUBTITLE
DVD
CONTROL
TITLE ZOOM REPEATA-B
AUDIO PLAY MODE SLOW
ANGLE 1 2
4 5
CANCEL
7 8
DISPLAY
0
C.C.
SLEEP TIMER
INPUT
AUDIO
RM-C394G
MUTING
+
CH
VOL
VOL
+
C H
TV MENU
TV/DVD DVD MENU
PREV NEXT
B.SEARCH PLAY
F.SEARCH
OPEN/CLOSE STOP
PAUSE/STILL
TV / DVD
NOTE:
• When playing back a tape that is not
recorded in Hi-Fi stereo mode, the
audio will automatically be monaural.
• When listening to a VHS Hi-Fi video
tape or MTS broadcast through the
VHF/UHF jack (Audio/Video cord not
connected), the sound will be
monaural.
When a MTS STEREO broadcast is re-
ceived, the STEREO will appear on the
screen and the program can be viewed or
recorded in stereo.
The Hi-Fi STEREO recording procedure is
the same as for normal recordings.
NOTE:
When using a CATV system, stereo TV programs may be transmitted
POWER
over a mono cable channel. In this case the word "STEREO" will not
appear and the sound will be in mono.
RETURN
Output selection
When viewing an MTS STEREO TV program, or playing a prerecorded
VHS Hi-Fi STEREO videotape, press A. MONITOR to select how the
3
audio will be heard through the speakers. Normally set to the Hi-Fi
STEREO position, this button can be set to the MONO position if the
6
stereo broadcast or videotape audio is of poor quality. The "R" and "L"
positions allow the audio from the Right or Left Hi-Fi channel to be heard
9
over both TV speakers. This button has no effect when viewing a MONO
videotape or TV program. Each time when you press the button, OUTPUT
TV RETURN
SELECTION display appears on the screen for several seconds. Refer
to the chart below.
LIGHT
SELECT
/ENTER
Separate Audio Program (SAP)
DVD SETUP
Your VCR is fitted with an SAP broadcast system which enables
you to switch to a separate audio program when viewing a
selected channel.
This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.
1
2
Listening to SAP
When the VCR is turned on or a channel selection is made, make
certain "SAP" appears on the screen. This means that the "Separate
Audio Program" broadcasting is available.
OUTPUT
SOUND HEARD ON BOTH
SELECTION
SPEAKERS
STEREO STEREO
L CH LEFT CHANNEL AUDIO
R CH RIGHT CHANNEL AUDIO
MONO MONO
Repeat the steps 1~2 on page
Then press ENTER to select [ON].
Then press SETUP MENU until
the menu screen is cleared.
STEREO SAP
STEREO
19 and select SAP.
MENU
CLOCK SET
TIMER REC SET
AUTO REPEAT
CH SET UP
SAP
LANGUAGE/IDIOMA/LANGUE
NO NOISE BACKGROUND
〈+/–/ENTER/MENU〉
SAP
OR
ON OFF
ON OFF
ON OFF
33