JVC HR-XVC1U User Manual page 27

ZERO RETURN function / Video Index Search system
ZERO RETURN function
This function makes tape-rewinding
stop at the counter 00:00:00 position
automatically.
TV
VCR DVD
DVD MENU MARKER RETURN
DISPLAY A.TRK C.RESET
SUB TITLE ANGLE
SP/EP
PLAY
ZOOM TITLE
MODE
0
TIMER TV/VCR
PLAY
STOP
SKIP
NOTE for Counter Display:
•
If you rewind the tape from "00:00:00",
a minus sign ("–") will be displayed in
front of the time.
•
When you load a tape, the counter will
reset to "00:00:00".
•
The counter does not function on
nonrecorded (blank) sections of the
tape. When you rewind, fast forward or
play tapes through blank sections, the
counter stops.
NOTE for Video Index Search system:
•
When you recorded an INDEX mark at
the very beginning of the tape, the
mark may not be found.
•
During INDEX search, the tape may
stop and begin to play at a slightly
different location.
•
INDEX may not function properly with
old or worn out video tapes.
•
INDEX mark may not be found if it is
extremely close to the point where the
search began.
•
In recording, if you stop recording
temporarily, the INDEX mark is not
recorded on the tape.
Preparation:
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light)
1
POWER
2
OPEN/
CLOSE
ZERO RETURN
SEARCH
MODE
3
REPEAT
A-B
TV
POWER
INPUT
The DISPLAY-button
TV VOL
Press DISPLAY during the playback. The clock
and tape counter alternate with each other in the
display.
SKIP
Video Index Search system
This function enables you to locate the beginning of any
recording made on the VCR.
Recording an INDEX MARK
The Index Search function automatically
records an INDEX mark on the tape
whenever a recording is initiated.
Index Search
Press INDEX
mode.
For Succeeding programs: Press INDEX
For Preceding programs: Press INDEX
(Additional press increases the INDEX NO.
up to 9.)
The INDEX
starts searching the INDEX NO. selected
and finds the portion, then playback starts
automatically.
To stop the Index Search, press STOP.
Press OSD.
The counter display shows the tape
running time during playback or recording.
SP
Press C. RESET at the desired tape position.
The counter display will be reset to the
"00:00:00" position (e.g. the begining of
recording).
SP
Press when playback or recording is finished.
Press ZERO RETURN.
The tape will be rewinded or fast forwarded and automatically
stop at the "00:00:00" position.
or during stop or play
or is pressed, the unit
12:00 SUN VPS CH 2
ZDF
STEREO
VCR
01:23:45 SP
12:00 SUN VPS CH 2
ZDF
STEREO
VCR
00:00:00 SP
VCR
S P
CH 012
INDEX
+ 3
.
.
or is displayed
INDEX NO. (up to 9)
27