JVC HR-XVC1U User Manual page 22

Tuner Setting
This VCR is equipped with a channel memory feature which allows channels to skip up or down to the
next channel set into memory, skipping over unwanted channels. Before selecting channels, they must
be programmed into the VCR's memory. In addition to normal VHF and UHF channels, this VCR can
receive up to 113 Cable TV channels. To use this VCR with an antenna, set the TV/CATV menu option to
the TV mode. When shipped from the factory, this menu option is in the CATV mode.
TV
VCR DVD
DVD MENU MARKER RETURN
DISPLAY A.TRK C.RESET
SUB TITLE ANGLE
SP/EP
PLAY
ZOOM TITLE
MODE
0
TIMER TV/VCR
PLAY
STOP
SKIP
/INDEX
ENTER/
SET
SELECT
SET UP
MENU
VCR/DVD/TV
22
Preparation:
POWER
• Turn ON the TV and set to the video input mode.
• Make sure TV/VCR/DVD switch has been slided to VCR/DVD.
Then press VCR to select the VCR mode. (The VCR indicator
will light)
TV/CATV Selection
1
OPEN/
CLOSE
ZERO RETURN
2
SEARCH
MODE
REPEAT
A-B
TV
POWER
INPUT
3
TV VOL
SKIP
/INDEX
4
SET
CANCEL
Setting channels automatically
The VCR can receive a maximum of 181 channels by
presetting the channels into memory.
1
2
Repeat the steps 1~2 on page
then press ENTER.
Press or to select the "TV/
CATV" option.
Then press ENTER to select the
TV or CATV mode. The arrow
indicates the selected mode.
TV - VHF/UHF channels
CATV - CABLE TV channels
Press SETUP MENU until the menu screen is cleared.
Repeat above steps 1~2 and
select AUTO CH MEMORY, then
press ENTER.
Then press ENTER.
The auto tuning will start. The
channel display will count up and
when finished, the screen returns
to normal.
19 and select CH SET UP,
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
=4F216
< >
/ / / /MENU
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
< >
/ / / /MENU
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
=4F216
< >
/ / / /MENU
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
< >
/ / / /MENU