JVC HR-XVC1U User Manual page 19

The Auto Clock feature enables the automatic clock setting and updating, and also to set the Time Zone
and Daylight Saving Time by receiving XDS (Extended Data Service) information carried on the channel
signal.
TV
VCR
DVD
MARKER RETURN
DVD MENU
DISPLAY A.TRK C.RESET
SUB TITLE ANGLE
SP/EP
PLAY
ZOOM TITLE
MODE
0
TIMER
TV/VCR
PLAY
STOP
SKIP
/INDEX
SET ENTER/
SELECT
SET UP
MENU
VCR/DVD/TV
NOTE:
• After Auto Clock setting, in some case
the clock may display the other time
zone's. You can correct the clock by
selecting your Time Zone setting
above.
• When the clock is not set or you set
the clock manually, Time Zone setting
is not available.
Preparation:
You must set the antenna connection before the AC cord plug is
inserted into the AC outlet.
Auto clock setting
POWER
WAIT 30 MINUTES!
connections of the antenna and the power plug. Because the Auto
Clock setting feature is activate.
After the clock is set automatically, you may have to set the Time
Zone and Daylight Saving Time.
Press POWER to turn on the VCR/DVD after the Auto Clock operation
completed.
•
When shipped from factory, the AUTO CLOCK option is set to ON position.
•
If you turn the VCR/DVD on during Auto Clock setting, the clock is not set.
OPEN/
CLOSE
•
With cable box connection, if the Auto Clock Setting is unsuccessful,
ZERO RETURN
please select the PBS channel carrying the XDS information, then
SEARCH
MODE
turn the VCR/DVD off. After 30 minutes, turn the VCR/DVD on, and
if the clock is not set automatically, set the clock manually. (See page 17)
REPEAT
A-B
Canadian Viewers:
TV
Please see note regarding the AUTO CLOCK SETTING option on page 58.
POWER
INPUT
Time Zone setting (STANDARD TIME)
In the rare event that you live within broadcast range of two
TV VOL
stations in two different time zones, the VCR/DVD may recognize
the wrong station for the AUTO CLOCK set. To correct the
situation:
Preparation:
Turn ON the TV.
•
When a TV is connected with an audio/video cable, select the video
•
input mode on the TV.
SKIP
• When a TV is connected only with an antenna cable, set to the
/INDEX
video channel 3 or 4. Then select VCR position with TV/VCR.
• Make sure the VCR mode has been selected. (Is the VCR indicator
being light?) (see step 1~2 on page 16)
SET
1
CANCEL
2
3
4
Auto clock setting
Press SETUP MENU. The VCR menu screen will appear.
Press or to select the SYSTEM SET UP menu, then
press ENTER.
Press or to select the
"STANDARD TIME" option, then
press ENTER.
Press or to select your
Time Zone, then press the
ENTER.
Press SETUP MENU until the MENU screen is cleared.
when the power switch is off, after the
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
<
/ / / /MENU
V-CHIP SET
LANGUAGE/IDIOMA/LANGUE
<
/ / / /MENU
>
>
19