The Extended Menu "Advanced Menu - Sennheiser SKM 500 Instruction Manual

Adjusting settings via the operating menu
The name can be displayed on the standard displays
"Frequency/Name" and
The name can consist of up to 8 characters such as:
• letters (without pronounciation marks),
• numbers from 0 to 9,
• special characters and spaces.
To enter a name, proceed as follows:
Move the multi-function switch to select a
character.
Press the multi-function switch to change to the
next segment/character or to store the complete
entry.
Activating/deactivating the automatic lock mode –
"Auto Lock"
Menu
Auto Lock
Active
Call up "Auto
Lock"
The lock mode prevents that the radio microphone is acci-
dentally switched off or programed during operation.
The lock mode icon
indicates that the lock mode is activated.
Move the multi-function switch to select the
desired setting.
For information on how to use the lock mode, refer to
page 14.
The extended menu
Setting transmission frequencies and frequency banks –
"Tune"
When you have selected one of the system banks
and then select the "Tune" menu, the radio micro-
phone automatically switches to channel 1 of the
frequency bank "U1". In this case, "U1.1" briefly
appears on the display panel.
Upon delivery, the channels of the frequency banks
"U1" to "U6" are not assigned a transmission
frequency.
When you are in the "Tune" menu item, the
RF signal is deactivated.
Via the "Tune" menu item, you can set a transmission
frequency to be stored in the current channel
select a different channel in one of the frequency banks
"U1" to "U6" and assign this channel a transmission
frequency.
22
"Name/Frequency
Auto Lock
Active
Select the desired
setting
"Stored"
on the current standard display
"Advanced
bank/Channel".
Auto Lock
Inactive
Store the setting
Menu"
or you can