The Extended Menu "Advanced Menu - Sennheiser evolution wireless G3 SKM 100 Instruction Manual

Adjusting settings via the operating menu
The extended menu
Setting transmission frequencies and the frequency bank "U" –
"Tune"
When you have selected one of the system banks and then select the
"Tune" menu, the radio microphone automatically switches to channel 1
of the frequency bank "U". In this case, "U.1" briefly appears on the display
panel. Upon delivery, the channels of the frequency bank "U" are not
assigned a transmission frequency.
When you are in the "Tune" menu item, the RF signal is deactivated.
Via the "Tune" menu item, you can set a transmission frequency to be
stored in the current channel
assign it a transmission frequency. It is vital to observe the notes on
frequency selection on Seite 20.
Setting a transmission frequency for the current channel
Move the multi-function switch until the "Tune" menu item
appears.
Press the multi-function switch.
The frequency selection appears.
Advanced Menu
Tune
533.875 MHz
Call up "Tune"
Set the desired frequency.
Press the multi-function switch.
Your settings are stored.
You are back to the operating menu.
Selecting a channel and assigning this channel a frequency
Move the multi-function switch until the "Tune" menu item
appears.
Press the multi-function switch until the frequency bank
selection appears.
Advanced Menu
Tune
543.200 MHz
Call up "Tune"
(special function)
Set the desired channel.
Press the multi-function switch.
The frequency selection appears.
Set the desired frequency.
18
"Advanced
or you can select a different channel and
Tune
533.875 MHz
B.Ch: U. 1
Select the MHz
value and confirm
"Stored"
Tu n e
543.200 MHz
B.Ch: U. 1
Select the channel;
store the setting
"Stored"
Menu"
Tune
534.875
B.Ch: U. 1
Select the kHz
value; store the
setting
Tu n e
543.200 MHz
B.Ch:
Set the
frequency
MHz
U. 1