Using the radio microphone
Using the radio microphone
CAUTION!
Reduced transmission range
If you touch the antenna
phone, the transmission range will be consid-
erably reduced!
To establish a transmission link, proceed as follows:
1. Switch the receiver on
(see the instruction manual of the receiver).
2. Switch the radio microphone on (see next section).
The transmission link is established and the display
backlighting of the receiver changes from red to orange.
It is vital to observe the notes on frequency
selection on page 26.
If you cannot establish a transmission link between radio
microphone and receiver, refer to the chapter "Synchro-
nizing the radio microphone with a receiver" on page 26.
Switching the radio microphone on/off
To switch the radio microphone
Briefly press the
ON/OFF
The radio microphone transmits an RF signal.
The red
display "Frequency/Name" appears on the
display panel. The transmission icon
displayed.
12
Only hold the radio microphone by its
body.
ON/OFF
ON
LED
of the radio micro-
on
(online operation):
button
lights up. The standard
.
is