Putting the radio microphone into operation
Putting the radio microphone
into operation
Inserting the batteries/accupack
For powering the radio microphone, you can either use two
1.5 V AA size batteries or the rechargeable Sennheiser
BA 2015 accupack (see "Accessories and spare parts" on
page 30).
Unscrew the lower part of the radio microphone from
the radio microphone's body
clockwise.
When unscrewing the radio microphone during
operation, the muting function is automatically
activated. "MUTE" appears on the display panel.
When screwing the lower part of the radio micro-
phone back to the radio microphone's body, the
muting is canceled. "MUTE" disappears from the
display panel.
Slide back the lower part of the radio microphone as far
as it will go.
Open the battery compartment cover
Insert the batteries or the BA 2015 accupack as shown
on the battery compartment cover. Observe correct
polarity when inserting the batteries/accupack.
8
by turning it counter-
.