®
ISOFLEX
Pressure Management Mattress
Instructions for Use
Read and understand the operating instructions and all safety precautions prior to use.
Symbols
Consult
Instructions for
Use
Foot end of
mattress
Latex free
Damp wipe only
10%
Chlorinated
Bleach
SAFETY PRECAUTIONS
Warning:
•
ISOFLEX mattress covers (top and bottom) should be inspected for tears, punctures, excessive wear, and
misaligned zippers each time the covers are cleaned. If a mattress cover becomes compromised, the
mattress should be removed from service immediately to prevent cross contamination.
Caution:
•
When utilizing an X-Ray plate while the patient is on ISOFLEX, take precautions to insure that no sharp
edges from the X-Ray plate come in contact with the mattress cover. It is recommended that a pillow case,
or some other protective device, is placed on the plate prior to placement under the patient. If a mattress
cover becomes compromised, the mattress should be removed from service immediately to prevent cross
contamination.
•
When cleaning the underside of the mattress, insure that no liquid is allowed to seep in to the zipper area
and watershed cover barrier, fluids allowed to come in contact with the zipper may leak in to the mattress.
•
Check patient's skin regularly. Consult physician if any redness or skin break occurs. Serious injury could
result if the patient's skin condition is left untreated.
•
The patient's skin should be checked and assessed every 8 hours, or once per shift, to insure proper
mattress performance.
Intended Use
ISOFLEX mattresses provide pressure redistribution for patients with existing, or who are at risk of developing,
pressure ulcers.
Unpacking Instructions:
1.
Remove the mattress from the box.
2.
Lay the mattress on its side.
3.
Using scissors, carefully cut the sleeve that holds the folded mattress. Be
careful not to inadvertently cut the mattress.
4.
Remove and discard the sleeve.
5.
Remove and discard the plastic bag and carton. Keep plastic away from children.
Do not tumble dry
Do not iron
Do not dry clean
Allow to completely air dry
Need help?
Do you have a question about the ISOFLEX and is the answer not in the manual?
Questions and answers