Final Check; Exchange Of Injector For The Burners - Whirlpool AGG540IX Instruction Manual

Final check

1. Open gas supply.
2. Check gas installations for secure fitting and tightness.
3. Ignite burner and check appearance of the flame.
Flame must be blue and have a regular shape. If the flame is yellowish, check if the burner cap
is seated securely or clean the burner.

Exchange of injector for the burners

1.Take off burner cap and burner body.
2.Unscrew injectors by turning the counter-clockwise.
3.Fit new injectors.
4.Check all connections for secure fitting and tightness.
New injector have their position marked on their packing or injector
table on injector table
There must be a flex pipe at the outlet of the installation for the natural gas connection of your product and
the tip of this pipe must be closed with a blind plug. Service Representative will remove the blind plug
during connection and connect your product by means of a straight connection device (coupling).
Make sure that the natural gas valve is readily accessible.
If you need to use your product later with a different type of gas, you must consult the Authorized Service
Agent for the related conversion procedure.
DANGER
The gas hose must not be clamped, bent or trapped or come into contact with hot parts of the
product.
There is the risk of explosion due to damaged gas hose.
Push the product towards the kitchen wall.
Hook safety chain.
Unless there is an abnormal
condition, do not attempt to
remove the gas burner taps.
You must call an Authorised
service agent if it is necessary ti
change the taps.
Unless there is an abnormal condition, do not attempt to remove the gas burner taps.
You must call an Authorised service agent if it is necessary ti change the taps.
1 Flame failure device
2 Spark plug
3 Injector
4 Burner
6