DAVIS Vantage Pro User Manual & Setup Manual page 29

Hide thumbs Also See for Vantage Pro:

Table of Contents

Barometric pressure may be displayed in inches (in), millimeters (mm), milli-

bars (mb) or hectoPascals (hPa). See "Barometric Pressure" on page 50.

• Pressure Trend Arrow

The Barometric Trend Arrow depicts the current barometric trend, measured

over the last 3 hours. The trend arrow is always displayed (unless less than

three hours of pressure data is available), whether the barometric pressure is

selected or not.

UV (Ultraviolet Radiation)

• Current UV

Press the UV / SUN key to display the current UV read-

ing as an index. Press again to see MEDS.

UV may be displayed as an index (1-7) or in MEDS. See

"UV (Ultra Violet) Radiation" on page 51.

Heat Indices

• Heat Index

Press and release the 2ND key, then press the

TEMP / HEAT key to display the Heat Index. See

"Apparent Temperature Measures" on page 47.

• THSW Index

If you have installed the optional Solar Radiation

Sensor, repeat the sequence one more time to display the THSW (Temperature -

Humidity - Sun - Wind Index). See "Apparent Temperature Measures" on

page 47.

Both heat indices appear in the same place on the screen and may be displayed,

like temperature and wind chill, as either degrees Fahrenheit (ºF) or Centigrade

(ºC).

Rain " Year ", Rain "Month", and Rain Rate

Vantage Pro Console Manual

Current Weather Mode

Page 29

Table of Contents