0 Mount bracket (E) from the direction of the arrow to the adjustment block (D).
Tighten the three M5 x 8mm shoulder screws (N) and 1 M4 x 8mm hex-head screw (J).
Adjusting block (D)
M5 shoulder screws (N)
(3 places)
! Connect the cables to the projector.
If passed upwards
HAS-WM06
M4 × 8 hexagon head screw (J)
(1 place)
Failure to heed this warning may cause the projector to fall or
other hazard resulting in damage or injury.
12
Bracket (E)
Projector
M5 shoulder screws (N)
(3 places)
(projector rear panel)
WARNING
If passed downwards