Attaching The Cable Cover - Hitachi HAS-WM06 User Manual

^ Attaching the cable cover

^-1. Fasten the cable cover (G) with the two M4 x 8mm hex-head screws (J).
^-2.
^-3. Attach cable cover (H) and fasten it with the one M4 x 20mm cover mounting screw (R).
Fit the hole onto the screw head.
Hook the tab in the hole in the
base bracket (side).
M4 x 20mm cover mounting screws (R)
HAS-WM06
Screw head
Hole
Cable cover (H)
(1 place)
Cable cover (G)
M4 × 8 hexagon head screws (J)
(2 places)
Screw head
Hole
Fit the hole onto the screw head.
Cable cover (I)
Hook the tab in the hole in the
base bracket (side).
19