Removal And Storage Of Screws; Attaching Bracket (F) - Hitachi HAS-WM06 User Manual

8 Remove the temporary mounting screws, and attach them to the base bracket
(B) for storage.
9 Attach the bracket (E) and the hook bracket enclosed with the projector to
the projector using 5 M6 × 16 hex-head screws (T).
Tightening torque: 1.47 N·m (15 kgf·cm)
Note: Make sure that the bracket (E) is correctly oriented.
HAS-WM06
Remove the temporary screws
(Two places).
Attach to base bracket (B).
M6 × 16 hexagon head screws (T)
(5 places)
Hook bracket
Bracket (E)
Take note of the orientation of this part.
Place cushioning material on a workbench. Turn
over the projector and place it upside down on the
cushioning material on the workbench.
Failure to heed this warning may cause the projector to
fall or other hazard resulting in damage or injury.
11
WARNING