Installation Procedure; Wall Mounting Of The Base Assembly - Hitachi HAS-WM06 User Manual

Installation procedure

1 Fasten the base bracket (center) (B) to the base brackets (side) (C) with the
eight M4 x 8mm hex-head screws (J).
M4 × 8 hexagon head screws (J)
(Eight places)
If mounting the base bracket assembly on a wall, use anchor bolts.
each bolt meets or exceeds 2,000 N.
When fastening the brackets with anchor bolts, use at least four bolts on the base bracket (center) (B) and at least
two on each of the base brackets (side) (C) (for a total of at least 8 bolts).
M8 anchor bolts
(8 or more)
Base bracket (center) (B): at least 4 places
sure the anchor bolts reach into the underlying concrete.
Base brackets (side) (C): at least 2 places on each
Weak material
Anchor bolt
Concrete
HAS-WM06
Base bracket (sides) (C)
Base bracket (center) (B)
Base bracket (sides) (C)
Base bracket assembly
This shape goes on the bottom.
WARNING
Weak material
7
Anchor bolt
Concrete
Anchor bolt
Concrete