— Playback – Basics —
Playing back a tape
You can monitor the recorded tape etc. on the LCD screen. If you close the LCD panel,
you can monitor the playback picture in the viewfinder. You can also control playback
using the Remote Commander supplied with your camcorder.
(1) Prepare the power source and insert the recorded tape.
(2) Set the POWER switch to VCR.
(3) Slide OPEN in the direction of the arrow to open the LCD panel.
(4) Press
(5) Press
(6) Adjust the volume following the steps below.
(7) Press
4
To return to FN
Press EXIT.
To stop playback
Press
42
to rewind the tape.
to start playback.
1 Press FN to display PAGE1 (p. XX).
2 Press VOL. The screen for the volume adjustment appears.
3 Press –/+ to adjust the volume.
– : to decrease the volume.
+ : to increase the volume.
OK. The display returns to PAGE1.
.
5
3
2
CAMERA
MEMORY
(CHG)
NET
WORK
OFF
VCR
ON
MODE
POWER
1
6,7
FN
–
VOL
The bar indicator
OK
+