Step 4 Using the touch panel
Notes
•When using the touch panel, press the operation buttons with your thumb or the
supplied styrus (DCR-IP55 only) supporting the LCD screen from the back side of it.
•Do not press the operation buttons with sharp objects other than the stylus supplied
(DCR-IP55 only).
•Do not press the LCD screen too hard.
•Do not touch the LCD screen with wet hands.
•If FN is not on the LCD screen, touch the LCD screen lightly to make it appear. You
can make the display appear and disappear with DISPLAY/TOUCH PANEL on your
camcorder.
•When the operation buttons do not work even if you press them, an adjustment is
required (CALIBRATION) (p. xx).
•When the LCD screen gets dirty, use the supplied cleaning cloth.
When executing each item
The green bar appears above the item.
If an item is not available
The color of the items changes to grey.
Touch panel
You can operate with the touch panel using the viewfinder (p. xx).
Press FN to display the following buttons:
In CAMERA mode
PAGE1
PAGE2
PAGE3
In VCR mode
PAGE1
PAGE2
PAGE3
See p. xx when you set the POWER switch to MEMORY/NETWORK for DCR-IP55
(MEMORY for DCR-IP45).
28
SPOT FOCUS, MENU, FADER, END SCH, SPOT METER, EXPOSURE
SELF TIMER, TITLE, DIG EFFT, MEM MIX
LCD BRT, VOL, COUNT RESET
MENU, VOL, TITLE, MULTI SRCH
LCD BRT, DIG EFFT, PB ZOOM, END SCH
DATA CODE, COUNT RESET, REC CTRL