Introduction - Basic Operations - Sony DCR-IP45 Quick Start Manual

Introduction – Basic operations
This section describes the basic operations to operate the camcorder.
How to turn on the power and select the mode
To supply power for the camcorder, see "Quick Start Guide" on page xx.
(1) Slide the POWER switch down while pressing the small green button, then release
(2) Slide the POWER switch down. Each time you slide it down, the mode changes as
8
your finger.
The camcorder is turned on, and then the camcorder turns to the CAMERA mode
so that the CAMERA lamp lights up.
follows and corresponding mode lamp also lights up.
CAMERA Use this mode when you record on a tape.
MEMORY/NETWORK (DCR-IP55)/MEMORY (DCR-IP45)
MEMORY:
NETWORK (DCR-IP55 only): Use this mode when you use the network
VCR Use this mode when you play back or edit an image recorded on a tape or
"Memory Stick".
1,2
CAMERA
MEMORY
NET
WORK
VCR
Use this mode when you record on a "Memory
Stick," or play back or edit an image in a
"Memory Stick."
function. For details, refer to the supplied
network function operating instructions.
(CHG)
OFF
ON
MODE
POWER